Suspension & Handling Upgrades

Shop suspension in NZ for lowering, lifting, ride comfort and sharper handling, from lowering springs and coilovers to 4WD lift kits, shock absorbers and adjustable arms.

Suspension brands: Bilstein, Eibach, H&R & more

Shop each brand’s suspension range at Hyper Drive.

Suspension buying guide

The right suspension depends on your vehicle and how you use it: daily driving, track days, towing or off-road touring. Suspension parts are vehicle-specific, so always check the fitment listed for your exact make, model and year.

Lowering springs

Lowering springs replace the factory springs to reduce ride height and body roll, giving a sportier look and feel. They work with your existing shocks, but worn or factory shocks can wear faster at a lower height, so many owners fit matched performance shocks at the same time.

Coilovers

Coilovers combine the spring and damper in one unit. Many let you adjust ride height and damping, which suits performance builds and drivers who want to fine-tune their setup.

Shock absorbers

Shock absorbers control how the springs move. Worn shocks show up as bouncing over bumps, nose-diving under braking, poor stability and uneven tyre wear. Replacing them restores ride comfort and control.

4WD lift kits

Lift kits raise a 4WD or ute for more ground clearance and room for larger tyres, and typically include longer springs and matched shocks. Choose a kit rated for the load you carry, such as a canopy, drawers or towing, and remember that a higher vehicle can handle differently on the road.

Adjustable arms and lowering blocks

Changing ride height alters wheel alignment. Adjustable arms let you bring camber and toe back into specification, while lowering blocks lower the rear of vehicles with leaf-spring rear suspension, such as many utes and vans. Always finish suspension work with a wheel alignment.

New Zealand rules and certification

Suspension changes in New Zealand must keep the vehicle compliant for its Warrant or Certificate of Fitness, including a minimum ground clearance of 100 mm. Some modifications, depending on the type and how much the ride height changes, need Low Volume Vehicle (LVV) certification. Check the current requirements with an LVV certifier before you buy.

Suspension FAQs

Will this suspension fit my vehicle?

Suspension is vehicle-specific. Check the make, model, year and body type listed on each product page, and contact Hyper Drive if you’re not sure before you order.

Do I need a wheel alignment after fitting suspension?

Yes. Changing ride height changes camber and toe, so have a wheel alignment done after fitting springs, coilovers, a lift kit or adjustable arms. It protects your tyres and keeps the vehicle tracking straight.

Should I replace shocks when fitting lowering springs?

It’s usually recommended. Lowering springs change how far the shocks travel, and worn or factory shocks can wear faster at a lower ride height. Many owners pair lowering springs with matched performance shocks.

Does a lift kit or lowered car need certification in New Zealand?

It depends on the modification and how much the ride height changes. Some suspension changes need Low Volume Vehicle (LVV) certification before the vehicle can pass a Warrant of Fitness, so check with an LVV certifier before you buy. See the buying guide for more detail.

Suspension

Upgrade your vehicle's suspension for optimal performance and comfort with Hyper Drive's comprehensive selection of suspension systems and accessories. Whether you're looking for adjustable arms, coilover suspension, lift kits, lowering blocks, or lowering springs, we've got you covered. Our premium range features top brands such as BC Racing, Bilstein, Cobra, Dobi Sport, Eibach, H&R, Hakon, HKS, King Springs, Lift Junkie, Outback Armour, and Tein. Transform your ride today for a smoother and more controlled driving experience.

Copyright © 2026 Hyper 2 Ltd, all rights reserved. Powered by n2 ERP

Payment Methods

Sign up for the Latest
Specials & new arrivals

Sign up successful!